Displays information on existing BFD sessions.
This command has no arguments or variables.
Use this command to show the status of the current BFD sessions.
The following session states are displayed:
- Init—The state when BFD is establishing the session.
- Down—The state when BFD detects that the session is down.
- Admin Down—The state when the user disables BFD on that interface.
- Up—The state when the BFD session is established.
The following command displays information on current BFD sessions:
# show bfd
Following is sample output from this command:
Number of sessions : 2 Sessions in Init State : 0 Sessions in Down State : 0 Sessions in Admin Down State : 1 Sessions in Up State : 1 SNMP Traps for Session Down : Enabled SNMP Traps for Session Up : Enabled SNMP Traps Batch Delay : 1000 ms Hardware Assist Operational State : Enabled (or) : Disabled (Incapable heterogeneous stack) (Incapable standalone platform) (Loopback port not configured) Hardware Assist Primary Loopback Port : 1:1 Hardware Assist Secondary Loopback Port : None Maximum # of Hardware Assist Sessions : 2047
This command was first available in ExtremeXOS 12.4.
The hardware assist output was added in ExtremeXOS 21.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.