show cfm segment {segment_name}
Displays information for CFM segments.
segment_name |
An alpha numeric string identifying the segment name. |
N/A.
Use this command to display information for the selected CFM segment.
If a segment name is not specified, the information for all of the segments that are currently configured are displayed.
The following command displays information for an active CFM segment that is configured to transmit with a specific count:
show cfm segment s2 CFM Segment Name : s2 Domain Name : pbt-d2 Association : pbt-d2-protecting MD Level : 2 Destination MAC : 00:04:96:1e:14:70 DMM Transmission : In Progress Transmission mode : Continuous Frames Transmitted : 2 Frames Received : 2 DMM TX Interval : 2secs DMR RX Timeout : 10 msec Alarm Threshold : 10 % Clear Threshold : 95 % Measurement Window Size : 60 Class of Service : 0 Tx Start Time : Sun Apr 19 21:18:58 2009 Min Delay : Sun Apr 19 21:18:58 2009 Max Delay : Sun Apr 19 21:19:00 2009 Last Alarm Time : None Alarm State : Not Set Lost Frames in Current window : 0 ------------------------------------------------------- Total Configured Segments : 2 Total Active Segments : 1
The following command displays information for a disabled segment:
BD-12804.1 # sh cfm seg s2 CFM Segment Name : s2 Domain Name : pbt-d2 Association : pbt-d2-protecting MD Level : 2 Destination MAC : 00:04:96:1e:14:70 DMM Transmission : Disabled Frames Transmitted : 10 Frames Received : 10 DMM TX Interval : 2secs DMR RX Timeout : 10 msec Alarm Threshold : 10 % Clear Threshold : 95 % Measurement Window Size : 60 Class of Service : 0 Tx Start Time : Sat Apr 18 05:39:54 2000 Min Delay : Sat Apr 18 05:40:12 2000 Max Delay : Sat Apr 18 05:39:56 2000 Last Alarm Time : None Alarm State : Not Set Lost Frames in Current window : 1 ------------------------------------------------------- Total Configured Segments : 2 Total Active Segments : 0
This command was first available in ExtremeXOS 12.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.