configure netlogin port allow egress-traffic

configure netlogin ports [port_list | all] allow egress-traffic [none | unicast | broadcast | all_cast]

Description

Configures the egress traffic in an unauthenticated state.

Syntax Description

all

Specifies all network login ports.

port_list

Specifies one or more network login ports.

none

Specifies that no traffic is sent out if if no authenticated clients exist on the VLAN.

unicast

Specifies that the unicast flooding traffic for the VLANs on the network login enabled port be sent.

broadcast

Specifies that the broadcast traffic for the VLANs on the network login enabled port be sent.

all_cast

Specifies that the broadcast and unicast flooding traffic for the VLANs on the network login enabled port be sent.

Default

The default is none.

Usage Guidelines

This command allows you to configure the egress traffic in an unauthenticated state on a per-port basis.

Enabling ONEPolicy removes the action of this command. This command is supported only in non-policy mode

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.