Configures or unconfigures a front panel port as the designated loopback port for hardware-assisted ELRP.
|elrp-client||Configures ELRP client.|
|hardware-assist||Selects configuring hardware-assisted ELRP.|
|loopback-port||Designates selecting a loopback port for hardware-assisted ELRP.|
|port||Selects the loopback port. The port must be an unused front panel port.|
|none||Unconfigures a loopback port.|
The loopback port must be an unused front panel port. The selected loopback port cannot be part of a VLAN. The loopback port cannot be changed or unconfigured if hardware-assisted ELRP mode is enabled. To disable hardware-assisted ELRP, use the command disable elrp-client .
The following example configures port 7 as the loopback port for hardware-assisted ELRP:
# configure elrp-client hardware-assist loopback-port 7
The following example unconfigures the loopback port for hardware-assisted ELRP:
# configure elrp-client hardware-assist loopback-port none
This command was first available in ExtremeXOS 30.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.