configure ip-security dhcp-snooping information circuit-id port-information port
Description
Configures the port information portion of the circuit ID.
Syntax Description
port_info | Specifies the circuit ID port information in the format of VLAN Info - Port Info; maximum length is 32 bytes. |
port | Specifies the port for which DHCP Snooping should be enabled. |
Default
The default value is the ASCII representation of the ingress port‘s SNMP ifIndex.
Usage Guidelines
This command allows you to configure the port information portion of the circuit ID whose format is vlan_info - port_info for each port. The parameter port info is a string of up to 32 bytes in length. When a specific value is not configured for port information, the port_info defaults to the ASCII representation of the ingress ports‘s SNMP ifIndex.
History
This command was first available in ExtremeXOS 12.3.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.