configure ip nat delete vlan

configure ip nat delete {vlan} vlan_name


Deletes VLANs from the Network Address Translation (NAT).

Syntax Description

ip Specifies Internet Protocol (IP).
nat Specifies enabling NAT.
delete Specifies deleting a VLAN.
vlan Specifies deleting a VLAN.
vlan_name Specifies the VLAN to delete.



Usage Guidelines

To add a VLAN, run the command configure ip nat add {vlan} vlan_name direction [ingress | egress | both].


The following example deletes the VLAN "vlan1" from NAT:

# configure ip nat delete vlan vlan1


This command was first available in ExtremeXOS 31.2.

Platform Availability

This command is available on the switches that support the IP NAT feature. For information about which switches support this and other features, see the Switch Engine 32.2 Feature License Requirements document.