enable snmp traps ospf
Description
Enables the OSPF module to send traps on various OSPF events.
Syntax Description
| all | Sets RFC1850 ospfSetTrap to 0x1ffff. |
| trap-map | Specifies the ospfSetTrap as defined in RFC1850. |
| bit-map | Specifies the ospfSetTrap value in HEX (for example, 0x1ffff for all traps). |
Default
The default is disabled.
Usage Guidelines
This command enables the OSPF module to send traps on various OSPF events.
Example
The following command sets ospfSetTrap for all traps:
enable snmp traps ospf all
History
This command was first available in ExtremeXOS 12.6.
Platform Availability
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.