enable mpls protocol rsvp-te

enable mpls protocol rsvp-te


Enables RSVP-TE for the switch.

Syntax Description

This command has no arguments or variables.



Usage Guidelines

When RSVP-TE is enabled, configured LSPs begin the process of TE LSP establishment and VLAN interfaces that have RSVP-TE enabled begin processing RSVP path/reserve messages. By default, RSVP-TE is disabled. While RSVP-TE is transitioning to the enabled state, only the MPLS show commands are accepted.


The following command globally enables RSVP-TE on the switch:

enable mpls protocol rsvp-te


This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.