configure fabric attach zero-touch-client
Description
Configures the Fabric Attach Zero Touch Client.
Syntax Description
zero-touch-client | Specifies Zero Touch Client. |
client | Specifies the type of Fabric Attach client. |
vlan | Specifies the VLAN on which to configure Zero Touch Clients. |
vlan_name | Specifies the VLAN name. The VLAN must be a tagged VLAN. |
vlan_id | Specifies the VLAN ID tag (1 and 4,094). |
nsi | Network Service Identifier. |
nsi | Specifies the Network Service Identifier. Range is 1-16777215. |
insi | Individual Network Service Identifier |
insi | Specifies the Individual Network Service Identifier. Range is 1-16777215. |
priority | Specifies the Zero Touch port priority for untagged packets. |
priority | Specifies the priority number to be used for untagged packets. Range is 0-7. |
dot1p | Specifies the use of dot1p port priority for untagged packets (default). |
none | Specifies no Zero Touch Client VLAN in use. |
enable | Specifies enabling Zero Touch Clients. |
disable | Specifies disabling Zero Touch Clients (default). |
Default
Unless configured, all clients are configured to disabled state without a mapping.
Usage Guidelines
This command is only used when operating as a Fabric Attach server. It has no effect when operating as a client or proxy.
The specified VLAN configuration on the Fabric Attach server is restricted to only tagged VLANs.
Example
The following example configures the Fabric Attach Zero Touch Client "switch" with a VLAN named "V2000" and Individual Service Identifier of 2000 with a priority of 1 for untagged packets:
# configure fabric attach zero-touch-client switch vlan v2000 nsi 2000 priority 1
History
This command was first available in ExtremeXOS 31.3.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.