Enables the MPLS interface for the specified VLAN.
| vlan | Enables an MPLS interface for one or more specific VLANs. |
| vlan_name | Enables an MPLS interface on the specified VLAN. |
| vlan all | Enables an MPLS interface for all VLANs that have been added to MPLS. |
Disabled.
The following command enables an MPLS interface for the specified VLAN:
enable mpls vlan vlan-nyc
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.