disable ntp broadcast-client
Disables an NTP broadcast client on the switch.
|broadcast-client||Specifies enabling NTP broadcast client.|
|vr||Specifies disabling NTP broadcast client for a VR.|
|vr_name||Specifies the VR name. If a VR name is not specified, the VR of current command context is used.|
An NTP broadcast client is enabled by default.
If a VR name is not specified, the VR of current command context is used.
If the broadcast client function is enabled, the system can receive broadcast-based NTP messages and process them only if a VLAN is enabled for NTP and the VLAN is active.
The following command disables an NTP broadcast client on the switch:
disable ntp broadcast client
This command was first available in ExtremeXOS 12.7.
The vr was added in ExtremeXOS 22.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.