configure ospf vlan neighbor add
Description
Configures the IP address of a point-to-point neighbor.
Syntax Description
vlan-name | Specifies a VLAN name. |
ip-address | Specifies an IP address. |
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.