disable nodealias ports
This command disables the Node Alias feature on specified ports. Node Alias discovers information about the end systems on a per-port basis. Information from packets from end systems, such as VLANID, source MAC address, source IP address, protocol, etc. are captured in a database that can be queried.
|nodealias||Node Alias feature that maps source IP address, MAC address, host name, and protocol on a per port basis.|
|ports||Designates that Node Alias should be disabled on specified ports.|
|port_list||Specifies on which ports to have Node Alias disabled. Designated as a port list separated by comma (,) or dash (-).|
|all||Specifies that all ports have Node Alias disabled.|
Node Alias is disabled by default on all ports.
If the port is part of a LAG, Node Alias should be disabled separately on each LAG port.
The following example disables Node Alias on all ports:
disable nodealias ports all
This command was first available in ExtremeXOS 22.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.