This command sets the time to wait for an acknowledgement of a transmitted LSP on a point-to-point interface.
|vlan all||Applies the timer value to all IS-IS VLANs.|
|vlan_name||Specifies a single VLAN to which the timer configuration applies.|
|seconds||Defines the timer value. The range is 0 to 65535 seconds.|
If an acknowledgement is not received when the timer expires, the LSP is resent and the timer is reset.
The following command sets the retransmit interval for the SJvlan to 10 seconds:
configure isis SJvlan timer retransmit-interval 10
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Premier license as described in the Switch Engine 32.2 Feature License Requirements document.