configure igmp ssm-map add

configure igmp ssm-map add group_ip [prefix | mask] [source_ip | src_domain_name] {vr vr-name}


Configures an IGMP SSM mapping.

Syntax Description

group_ip Specifies the multicast IP address for the group mapping.
prefix Specifies a prefix length for the multicast group IP address. The range is 4 to 32.
mask Specifies the network mask for the group multicast IP address.
source_ip The IP address for a multicast group source.
src_domain_name The source domain name for the multicast group source.
vr-name Specifies a virtual router name. If the VR name is omitted, the switch uses the VR specified by the current CLI VR context.



Usage Guidelines

IGMP SSM mapping operates only with IPv4.


The following example configures an IGMP-SSM mapping for the range of multicast IP addresses at originating from IP host

configure igmp ssm-map add


This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the IPv4 multicast feature, see the Switch Engine 32.2 Feature License Requirements document.