configure snmpv3 target-addr retry

configure snmpv3 target-addr [[hex hex_addr_name] | addr_name] retry retry_count

Description

Configures SNMPv3 INFORM notification retries.

Syntax Description


`hex_addr_name`	Specifies a address name in hexadecimal format.
`addr_name`	Specifies the address name in ASCII format.
`retry_count`	Specifies the maximum number of times to resend an SNMPv3 inform.

Default

The retry default is 3.

Usage Guidelines

Use this command to configure the number of times an SNMPv3 INFORM message is to be resent to the (notification responder) manager when a response has not been received.

Example

The following command configures a retry count of 5 for the target address A1:

configure snmpv3 target-addr A1 retry 5

History

This command was first available in ExtremeXOS 12.5.3.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.