create ospf area
Description
Creates an OSPF area.
Syntax Description
| area-identifier | Specifies an OSPF area. |
Default
Area 0.0.0.0.
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates an OSPF area:
create ospf area 1.2.3.4
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.