clear ports link-flap-detection status

clear ports [port_list | all] link-flap-detection status

Description

Manually enables ports that have been disabled due to excessive link-flapping.

Syntax Description

ports Physical ports.
port_list List of ports that you want to enable that were disabled due to excessive link flapping.
all Enables all ports in the system that were disabled due to excessive link flapping.
status Enable ports currently in disabled state due to excessive link flapping.

Default

N/A

Usage

Ports that have been disabled due to excessive link flapping cannot be enabled using the enable port command. They must be enabled using the clear ports link-flap-detection status command.

Example

The following example re-enables all ports on the switch that were disabled due to excessive link flapping:

clear ports all link-flap-detection status 

History

This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.