enable l2vpn vpls peer fdb send-mac-withdrawal
Enables the Layer 2 VPN MAC address withdrawal capability.
|l2vpn||Designates L2 VPN configuration.|
|vpls||Designates VPLS of MPLS configuration.|
|peer||Designates VPLS peer.|
|ipaddress||Selects the VPLS peer of the provided IP address.|
|all||Selects all VPLS peers.|
|send-mac-withdrawal||Enables sending the MAC address withdrawal message.|
Use this command to enable FDB MAC withdrawal after it has been disabled.
The following command enables MAC address withdrawal message for all VPLS peers:
# enable l2vpn vpls peer all fdb send-mac-withdrawal
This command was first available in ExtremeXOS 12.1.
The l2vpn keyword was added in ExtremeXOS 12.4.
This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.