enable learning port
Enables MAC address learning on one or more ports.
|drop-packets||Forwards EDP packets, and drops all unicast, multicast, and broadcast packets from a source address not in the FDB. No further processing occurs for dropped packets.|
|all||Specifies all ports.|
|port_list||Specifies one or more ports or slots and ports.|
Use this command to enable MAC address learning on one or more ports.
The following example enables MAC address learning on ports 7 and 8 on a switch:
enable learning ports 7-8
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.