disable mpls exp replacement
Description
Disables setting an MPLS packet's EXP value based on the packet's QoS profile.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command disables setting an MPLS packet's EXP value based on the packet's QoS profile. The QoS profiles to EXP value mappings are configured using the configure mpls exp replacement command.
When disabled, all MPLS packets are transmitted with an EXP value of zero.
Example
The following command disables the setting of an MPLS packet's EXP value based on the packet's QoS profile:
disable mpls exp replacement
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.