configure erps control-mac
Configures ERPS control MAC (either default or auto) on a particular ERPS ring instance.
|erps||Specifies ERPS (ITU-T G.8032).|
|ring-name||Specifies the alphanumeric string that identifies the ERPS ring/sub-ring.|
|control-mac||Destination MAC used in R-APS PDUs .|
|auto||Use ring ID-based MAC address (01:19:A7:00:00:ring-id).|
|default||Use default MAC address (01:19:A7:00:00:01).|
By default, if an ERPS ring instance is created with a user-defined ring ID, the control MAC used by ring instance is auto (01:19:A7:00:00:ring-id).
By default, if an ERPS ring instance is created without a user-defined ring ID, the control MAC used by the ring instance is default (01:19:A7:00:00:01).
- 01:19:A7:00:00:01 (default)
- 01:19:A7:00:00:ringId (auto)
NoteThis command is only applicable on ERPS ring instances created with user-defined ring ID.
The following example configures the control MAC of an ERPS ring instance created with a user-defined ring ID:
# configure erps Ring2 control-mac auto
The following example configures the control MAC of an ERPS ring instance created without a user-defined ring ID:
# configure erps Ring1 control-mac auto Error: This cli is applicable only when the erps ring is created with a user defined ringId. The default control-mac is used here.
This command was first available in ExtremeXOS 32.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.