Assigns an ESRP domain ID to an ESRP domain.
| esrpDomain | Specifies the name of an ESRP domain. |
| number | Specifies the number to use for the ESRP domain ID. The user-configured ID range is 4096 through 65,535. |
If the master VLAN is tagged, ESRP uses that VLANid for the ESRP domain ID. If the master VLAN is untagged, you must specify the ESRP domain ID.
Before you enable a specific ESRP domain, it must have a domain ID. A domain ID is either a user-configured number or the VLANid of the tagged master VLAN. If you do not have a domain ID, you cannot enable ESRP on that domain.
Each switch participating in ESRP for a particular domain must have the same domain ID configured.
The number parameter range for user-configured domain IDs is 4096 through 65,535.
If the master VLAN is tagged, you can use that VLANid for the ESRP domain ID. The range for VLAN tags is 2 through 4095. Tag 1 is assigned to the default VLAN.
The following command assigns the domain ID 5000 to ESRP domain esrp1:
configure esrp esrp1 domain-id 5000
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.