configure policy convergence-endpoint
Description
This command globally enables or disables Convergence End Point (CEP) for ONEPolicy.
Syntax Description
enable | Enables CEP for ONEPolicy. |
disable | Disables CEP for ONEPolicy. |
Default
By default CEP is disabled.
Usage Guidelines
This feature requires that ONEPolicy is enabled on the switch (see enable policy).
Example
The following example enables CEP on the switch:
# configure policy convergence-endpoint enable
History
This command was first available in ExtremeXOS 22.2.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.