configure iparp locktime

configure iparp {vr vr_name}{locktime locktime}

Description

Sets the time before a new entry can replace an old entry in the Address Resolution Protocol (ARP) table.

Syntax Description

vr Specifies setting a VR or VRF.
vr_name Specifies the name of the VR or VRF.
locktime Specifies setting a time before a new entry can replace an old entry.
locktime Sets locktime value (range 0–30,000 milliseconds). Default 1,000 milliseconds.

Default

The default locktime is 1,000 milliseconds.

Example

The following example sets the locktime to 5,000 milliseconds:
configure iparp locktime 5000

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.