configure ospf add vlan area
Description
Enables OSPF on one or all VLANs (router interfaces).
Syntax Description
| vlan-name | Specifies a VLAN name. |
| all | Specifies all VLANs. |
| area-identifier | Specifies the area to which the VLAN is assigned. |
| passive | Specifies to stop sending and receiving hello packets on this interface. |
Default
Disabled.
Usage Guidelines
Not applicable.
Example
The following command enables OSPF on a VLAN named accounting:
configure ospf add vlan accounting area 0.0.0.1
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.