show iproute reserved-entries

show iproute reserved-entries {slot slot_num}

Description

Displays the configured number of IPv4 and IPv6 routes reserved in the Longest Prefix Match (LPM) hardware table.

Syntax Description

slot_num For SummitStack only, this option displays the reservations for the specified slot.

Default

N/A.

Usage Guidelines

The IPv4 Routes column in the command output shows whether IPv4 routes are stored in internal or external LPM tables.

To modify the configuration that this command displays, use the following command:

configure iproute reserved-entries [ num_routes_needed | maximum | default ] slot [all |slot_num]

Example

The following example displays the reserved space for IP routes:

# show iproute reserved-entries
                                       IPv4       # Reserved Routes            Minimum #
Slot  Type                             Routes      IPv4   (or IPv6)            IPv4 Hosts
----  -------------------------------  --------  -------  ------------------   ----------
1     5720-24MXW                       Internal    20432  ( 10216) [default]         4112

Maximum supported # IPv4 (or IPv6) Reserved Routes:
5320 16-port, 5320 24-port             Internal     8160  (  4080)
5320 48-port, 5420F, 5420M             Internal    12256  (  6128)
5520                                   Internal    16352  (  8176)
5720MW                                 Internal    16352  (  8176)
5720MXW                                Internal    24544  ( 12272)

Note:  IPv4 Hosts can occupy unused HW Route table space,
       unless # Reserved Routes is "maximum".

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.