configure cfm segment timeout
Description
Configures the timeout for a segment.
Syntax Description
segment_name |
An alpha numeric string identifying the segment name. |
msec |
Specifies the number of milliseconds. The range is 1 to 65535. |
Default
50 milliseconds.
Usage Guidelines
Use this command to configure the timeout value for the reception of a DMR frame. If a DMR frame is not received within this specified time, that frame is considered as an errored frame, and if the number of errored frames reaches the alarm threshold of the current window size, an alarm is generated.
This command is optional, and if not configured, timeout is set to the default.
Example
The following command configures a timeout value of 45 milliseconds for the s4 segment:
configure cfm segment s4 timeout 45
History
This command was first available in ExtremeXOS 12.3.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.