configure mpls rsvp-te lsp fast-reroute

configure mpls rsvp-te lsp lsp_name fast-reroute [enable | disable]

Description

Enables or disables fast-reroute protection for the specified LSP.

Syntax Description

lsp_name Specifies the name of the LSP you are configuring.

Default

Disabled.

Usage Guidelines

To signal the fast-reroute protected LSP, use the enable mpls rsvp-te lsp [lsp_name | all] command. Similarly, to disable the fast-reroute protected LSP, use the disable mpls rsvp-te lsp [lsp_name | all] command.

Example

This command enables fast-reroute protection on LSP aus:

configure mpls rsvp-te lsp aus fast-reroute enable

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.