configure elrp-client dynamic-vlans client/uplink ports/remote-endpoints vxlan
This command turns Extreme Loop Recognition Protocol (ELRP) on/off for client ports or uplink ports for dynamic VLANs.
|netlogin||Specifies that the command applies to dynamic VLANs created by Network Login only.|
|vm-tracking||Specifies that the command applies to dynamic VLANs created by virtual machine MAC tracking only.|
|client-ports||Specifies client ports only.|
|uplink-ports||Specifies uplink ports only.|
|remote-endpoints||Specifies remote endpoints that are part of this VLAN.|
|vxlan||Specifies VXLAN remote endpoints that are part of this VLAN.|
|on||Enable ELRP for dynamic VLANs.|
|off||Disables ELRP for dynamic VLANs.|
ELRP for dynamic VLANs is "off" by default.
The following example enables ELRP for Netlogin dynamic VLANs on uplink ports only:
configure elrp-client dynamic-vlans netlogin uplink-ports on
The following example enables ELRP for XNV dynamic VLANs on VXLAN remote endpoints that belong to the VLAN:
configure elrp-client dynamic-vlans vm-tracking remote-endpoints vxlan on
This command was first available in ExtremeXOS 22.2.
Remote endpoint capability was added in ExtremeXOS 22.4.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.