enable mpls static lsp

enable mpls static lsp {lsp_name | all }


Administratively enables one or all static LSPs.

Syntax Description

lsp_name Identifies the LSP to be enabled.
all Specifies that all static LSPs on this LSR are to be enabled.



Usage Guidelines

On executing this command, the software tries to activate the static LSP by programming the LSP in hardware. Static LSPs are not enabled by default. You need to explicitly enable LSPs after the ingress and egress segments have been configured.


The following command enables a static LSP:

enable mpls static lsp lsp598


This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Switch Engine 32.2 Feature License Requirements document.ture-link-in-22.1"/>