create access-list zone
Creates a dynamic ACL zone, and sets the priority of the zone.
|name||Specifies the dynamic ACL zone name. The name can be from 1-32 characters long.|
|zone-priority number||Specifies priority of the zone. The range is from 1 (highest priority) to 4294967295 (lowest priority).|
The denial of service, system, and security zones are configured by default, and cannot be deleted.
This command creates a dynamic ACL zone. You can configure the priority of the zone in relation to the default zones or to other configured zones.
The following command creates a new zone, called myzone, with a priority of 2:
create access-list myzone zone-priority 2
This command was first available in ExtremeXOS 11.6.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.