Removes a range of IPv6 addresses in an OSPFv3 area to be aggregated.
|area_identifier||Specifies an OSPFv3 area, a four-byte, dotted decimal number.|
|ipv6netmask||Specifies an IPv6 address / prefix length.|
No OSPFv3 inter-area-prefix LSAs are configured.
If you attempt to delete a range that was not configured, you receive an error message.
The following command is used to delete a summary network from area 0.0.0.1:
configure ospfv3 area 0.0.0.1 delete range 2aaa:456:3ffe::/64
This command was first available in ExtremeXOS 11.2.
The inter-prefix and nssa keywords were added in ExtremeXOS 21.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.