configure ospf area delete range
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
area-identifier | Specifies an OSPF area. |
ip-address | Specifies an IP address. |
ip-mask | Specifies a subnet mask. |
ipNetmask | Specifies IP address / Netmask. |
Default
N/A.
Usage Guidelines
Not applicable.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.