Configures a range of IP addresses in an OSPF area to be aggregated.
|area-identifier||Specifies an OSPF area.|
|ip-address||Specifies an IP address|
|ip-mask||Specifies a subnet mask.|
|ipNetmask||Specifies IP address / Netmask.|
|advertise||Specifies to advertise the aggregated range of IP addresses.|
|noadvertise||Specifies not to advertise the aggregated range of IP addresses.|
|type-3||Specifies type 3 LSA, summary LSA.|
|type-7||Specifies type 7 LSA, NSSA external LSA.|
If advertised, the aggregated IP range is exported as a single LSA by the ABR.
The following command is used to summarize a certain range of IP addresses within an area and export them out as a single address:
configure ospf area 184.108.40.206 add range 10.1.2.0/24 advertise type-3
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.2 Feature License Requirements document.