disable bootp vlan
Disables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the VLAN from a BOOTP server.
|bootp||Disable BOOTP client.|
|ipv4||IPv4 client. (default)|
|dhcp||Disable DHCP client.|
|vlan||Specify VLAN to configure BOOTP/DHCP client for.|
|vlan||Specifies a VLAN name.|
|all||Disables all VLANs.|
If the IPv4/IPv6 keyword is not specified, IPv4 is taken as default for the mentioned VLAN.
The following example disables the generation and processing of BOOTP packets on a VLAN named accounting:
disable bootp vlan accounting
This command was first available in ExtremeXOS 10.1.
The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.