configure stpd bpdu-forwarding
Description
This command specifies whether to forward or drop BPDUs when STP is disabled.
Syntax Description
bpdu-forwarding | Specifies forwarding or discarding spanning tree BPDUs when STP is disabled. |
on | Forward STP BPDUs when spanning tree is disabled (default). |
off | Drop STP BPDUs when spanning tree is disabled. |
Default
The default is on.
Usage Guidelines
STP must be disabled globally to disable BPDU forwarding; otherwise, an error message
appears:
Error: All Spanning Tree Domains must be disabled globally before configuring stpd bpdu-forwarding off.
When the BPDU forwarding is off and you try to configure the filter method using the configure stpd filter-method [system-wide| port-based] command, the
following error message
appears:
Error: Spanning Tree Forwarding must be enabled globally before configuring filter-method.
Example
The following example disables BPDU forwarding when STP is disabled:
configure stpd bpdu-forwarding off
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.