disable isis
Description
This command disables the specified IS-IS router process on the current virtual router.
Syntax Description
area_name | Specifies the name of the IS-IS router process to be disabled. |
Default
Disabled.
Usage Guidelines
IS-IS PDUs are no longer sent or processed on this IS-IS router process. The LSP and neighbor databases are purged. IS-IS routes are purged from the routing table. This command should only be used during planned network outages. This command has no effect on router processes that are already disabled.
Example
The following command disables the IS-IS process named areax:
disable isis area areax
History
This command was first available in ExtremeXOS 12.1.
Platform Availability
This command is available on platforms with a Premier license as described in the Switch Engine 32.2 Feature License Requirements document.