configure netlogin agingtime
Description
Lets you configure network login aging.
Syntax Description
minutes | Specifies the aging time in minutes. |
Default
The default value is 5.
Usage Guidelines
Use this command to configure the aging time for network login. The aging time is the time after which learned clients that failed authentication or did not attempt to authenticate are removed from the system. This prevents the switch from keeping all clients ever seen on a network-login-enabled port.
The range can be from 0 to 3000, where 0 indicates no age out.
Example
The following command specifies an aging time of 15 minutes:
configure netlogin agingtime 15
History
This command was first available in ExtremeXOS 11.1.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.