This command configures the time period a key will be active.
|keychain_name||Specifies the name of the keychain.|
|key||Authentication key entry.|
|key_id||Specifies the unique identifier within a keychain. Range is 1-65535.|
|active-lifetime||Specifies the time period the key will be active.|
|local||Specifies the time in the local time zone instead of UTC.|
|start||Specifies the start of the time period.|
|start_time||Specifies the date and time the key will become active. Format is YYYY-MM-DDThh:mm:ss.|
|end||Specifies the end of the time period.|
|end_time||Specifies the date and time the key will stop being active. Format is YYYY-MM-DDThh:mm:ss.|
|duration||Specifies the length of time the key will be active.|
|seconds||Specifies the duration in seconds. Range is 1-15552000.|
|maximum||Specifies that the key will be active for 180 days from the start time.|
Use this command to configure the time period a key will be active.
The following command configures the keychain active lifetime:
configure keychain ospfv3-keys1 key 3 active-lifetime local start 2021-08-01T00:00:00 end 2021-09-01T00:00:00
This command was first available in ExtremeXOS 31.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.