configure mlag peer interval

configure mlag peer peer_name interval msec

Description

Configures the length of time between health check hello packets.

Syntax Description

peer_name Specifies an alpha numeric string identifying the This command is available on ExtremeSwitching 5320, 5420, 5520, 5720 series switches. peer.
msec Specifies an MLAG peer health-check hello interval in milliseconds. The range is 50-10000ms. The default is 1000ms.

Default

The interval default is 1000 milliseconds.

Usage Guidelines

Use this command to configure the length of time between health check hello packets exchanged between MLAG peer switches. After three health check hellos are lost, the MLAG peer switch is declared to be failed, triggering an MLAG topology change.

Example

The following command sets an interval of 700 milliseconds on the switch101 peer. switch:

# configure mlag peer switch101 interval 700

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.