show mvr cache

This command is provided for backward compatibility. The recommended command is:

show mcast cache {{vlan} vlan_name} {{[group grpaddressMask | grpaddressMask] {source sourceIP | sourceIP}} {type [snooping | pim | mvr]}| {summary}}

The syntax for the original form of this command is:

show mvr cache {vlan vlan_name}

Description

Displays the multicast cache entries added by MVR.

Syntax Description


`vlan_name`	Specifies a VLAN name.

Default

N/A.

Usage Guidelines

If no VLAN is specified, information for all VLANs is displayed.

Example

The following command displays the multicast cache in the MVR range for the VLAN vlan110:

Switch.78 # show mvr cache vlan110

This command display is the same as for the following preferred command:

show mcast cache {{vlan} name} {{[group grpaddressMask | grpaddressMask] {source sourceIP |sourceIP}} {type [snooping | pim | mvr]}| {summary}}

History

This command was first available in ExtremeXOS 11.4.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MVR feature, see the Switch Engine 32.2 Feature License Requirements document.