This command sets the wide metric value for one or all IS-IS VLANs.
vlan all | Applies the configuration to all IS-IS VLANs. |
vlan_name | Specifies a single VLAN to which the configuration applies. |
metric | Sets the metric. The range is 1 to 16777214. |
level [1 | 2] | Limits the configuration change to either level 1 or level 2. If neither level 1 nor level 2 is specified, the configuration applies to both levels. |
10.
If the wide metric style is enabled on the associated IS-IS router process, the wide metric value is used in Extended IP reachability TLVs, Extended IS Reachability TLVs, and IPv6 Reachability TLVs in LSPs.
The following command sets the wide metric to 15 for all IS-IS VLANs:
configure isis vlan all wide-metric 15
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Premier license as described in the Switch Engine 32.2 Feature License Requirements document.