Enables or disables the PIM-DM state refresh feature on one or all VLANs.
|ipv4||Specifies the IPv4 address family.|
|ipv6||Specifies the IPv6 address family.|
|vlan_name||Specifies a VLAN on which to enable or disable the PIM-DM state refresh feature.|
|on||Enables the PIM-DM state refresh feature on the specified VLANs.|
|off||Disables the PIM-DM state refresh feature on the specified VLANs.|
The following example enables the PIM-DM state refresh feature on VLAN blue:
configure pim state-refresh blue on
This command was first available in ExtremeXOS 12.4.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the Switch Engine 32.2 Feature License Requirements document.