disable snmp traps port-up-down ports

disable snmp traps port-up-down ports [port_list | all]

Description

Disables port up/down trap reception for specified ports.

Syntax Description

port_list

Specifies one or more ports or slots and ports.

all

Specifies all ports on the switch.

Default

Enabled.

Usage Guidelines

Use this command to stop receiving SNMP trap messages when a port transitions between being up and down.

Example

The following command stops ports 3, 5, and 12 through 15 on a stand-alone switch from receiving SNMP trap messages when the port goes up/down:

disable snmp traps port-up-down ports 3,5,12-15

History

This command was first available in ExtremeXOS 10.6.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.