configure snmpv3 delete filter-profile

configure snmpv3 delete filter-profile [all |[hex hex_profile_name | profile_name] {param [hex hex_param_name | param_name}]]

Description

Removes the association of a filter profile with a parameter name.

Syntax Description

all Specifies all filter profiles.
hex_profile_name Specifies the filter profile name to delete. The value is to be supplied as a colon separated string of hex octets.
profile_name Specifies the filter profile name to delete in ASCII format.
hex_param_name Specifies to delete the filter profile with the specified profile name and parameter name. The value is to be supplied as a colon separated string of hex octets.
param_name Specifies to delete the filter profile with the specified profile name and parameter name in ASCII format.

Default

The default storage type is non-volatile.

Usage Guidelines

Use this command to delete entries from the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. Specify all to remove all entries. Specify a profile name to delete all entries for that profile name. Specify a profile name and a parameter name to delete just those entries for that filter profile and parameter name.

Example

The following example deletes the filter profile prof1 with the parameter name P1:

configure snmpv3 delete filter-profile prof1 param P1

History

This command was first available in ExtremeXOS 10.1.

The hex_profile_name and hex_param_name parameters were added in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.