show flowmon keyNEW!
Description
Displays Flow Monitor key information.
Syntax Description
key | Specifies the Flow Monitor key. |
key_name | Specifies the assigned name of the Flow Monitor key. Range is 32 characters. |
all | Specifies to show Flow Monitor information for all keys. |
detail | Specifies to show all information associated with the specified key. |
Default
N/A.
Usage Guidelines
For each key, the name, type, associated group name (if applicable), and the 'before' or after key name (if applicable) are displayed.
When all is entered and detail is not specified, all keys are shown in tabular format.
When detail is entered, the IPv4 or IPv6 address and mask, source or destination UDP or TCP port, protocol or next header, and specified list of ports to which the key is applied are shown. If none are specified, all values are shown.
Example
The following command displays information for a key with the name 'src-ipv4-addr':
# show flowmon key src-ipv4-addr
History
This command was first available in ExtremeXOS 32.2.
Platform Availability
This command is available on ExtremeSwitching 5520 and 5420 series switches.