show ntp restrict-list
Description
Shows the NTP access list of the current system based on the source IP blocks.
Syntax Description
user | Displays the NTP access list of the current user. |
system | Displays the for the current system. |
all | Displays both user and system data. |
vr | Specifies showing NTP information for a given VR. |
vr_name | Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used. |
Default
Displays all by default.
Usage Guidelines
N/A.
Example
The following command displays all NTP access list information for VR "VR-Mgmt":
# show ntp restrict-list user vr "VR-Mgmt" VR Name IP Address Mask Count Type Action ======================================================================== VR-Mgmt 1.1.1.1 255.255.255.255 0 User Permit
History
This command was first available in ExtremeXOS 12.7.
The vr keyword was added in ExtremeXOS 22.2.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.