Disables the ELRP client (standalone ELRP) globally.
This command has no arguments or variables.
This command disables the ELRP globally so that none of the ELRP VLAN configurations take effect.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the enable elrp-client command to globally enable the ELRP client.
The following command globally disables the ELRP client:
This command was first available in ExtremeXOS 11.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.