| vlan_name |
Specifies to apply settings to specific VLAN name. |
| all |
Specifies all VLANs. |
| none |
Specifies to drop all received RIP packets. |
| v1only |
Specifies to accept only RIP version 1 format packets. |
| v2only |
Specifies to accept only RIP version 2 format packets. |
| any |
Specifies to accept RIP version 1 and RIP version 2 packets. |
N/A.
None.
The following command configures the receive mode for the VLAN finance to accept only RIP version 1 format packets:
# configure rip finance rxmode v1only
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with a Base license or higher as described in the Switch Engine 32.2 Feature License Requirements document.